How does dent master work

Apply Slow Pressure to Work out the Dent. Special tools are then utilized to carefully massage the exterior back to its original position. Want to see how paintless dent removal works with your own eyes? Paintless Dent Repair can remove a variety of dents, dings, and body creases. PDR is a specialized technique utilized to restore vehicles to their factory condition quickly and cost effectively. Additionally, if there is no damage to the paint, the dent, ding, or crease is likely repairable using PDR.

Moreover, PDR is an excellent solution to help restore your vehicle to its original condition for dents of all sizes, including small hail damage to large creases. Standard paintless dent repairs are very time efficient and, in most cases, can be completed same day. However, PDR times can vary based on severity of damage such as size, positioning on vehicle, and quantity of dents, dings, or creases. More specifically, hail damage may take a few days to completely remove all the damage on the surface area of the vehicle.

Paintless Dent Repair, on the other hand, requires no fillers and no sanding. More and more consumers are finding PDR to be an effective and inexpensive alternative to getting minor repairs done at a body shop. PDR can be the best option for smaller dents, where the paint has not broken. These may be dents picked up from trolleys or car park dings , or those caused by hail or stones. It can also complement a more wide-ranging dent repair, by preparing a damaged panel for repainting, minimising the use of filler.

Paintless Dent Removal is an expert procedure that requires a skilled technician. The technician needs to carefully manipulate precise locations of metal to the correct height. This is often done from the inside of the panel, using metal roads and body picks to massage out the dents, returning the panel to its original state. A deeper dent will need multiple stages. Fluorescent or LED lighting are often used to illuminate the damaged area.

This helps the technician to visualise the dent as they work. A variety of specialist tools used to gain access to the back of dented panels. These carefully massage dents out from the inside. Contact us for a free estimate on or complete our online form here.

The finished product! Experienced PDR operators are trained panel beaters, and they will be able to tell you if you need to go to a full-service panel shop when paint work is required. It comes down to how much work is needed - the Mini took about three hours to complete, where some of the other cars that have gone through the garage have spent weeks there.

Mr Jouy with the Mini looking good as new! Mr Booth has been in the business for almost as long as Mr Jouy, having set up shop in Sydney way back in Simon Booth, owner of Dent Garage. Mr Booth also does the occasional door dent or bonnet bump, and he says that customers should be aware of their car - be it a new vehicle with advanced materials, or an older car with a chequered history - because that could determine if PDR is possible.

For instance, he says that older cars that may have been crashed or had paint repairs in the past could work against you. For owners of newer cars, be wary if the vehicle has aluminium panels. Many new cars have aluminium bonnets, fenders and tailgates in order to save weight and increase strength compared to standard steel panels.

But this can present a challenge for PDR pros. Metal has memory, so when we press it back, it goes back to where it was. A steel-pressed panel wants to spring back to its shape that it was pressed under heat. A close up of the bump on the little Echo. Mr Booth said his tool kit has evolved over the years as advances in the field have meant there are purpose-made instruments available to order online. Lighting is one example.

Our estimators will look for many of the signs we mentioned above that would indicate that your dent could not be repaired.

If the dent is within these parameters, the estimator moves onto the second step. The second step in the paintless dent repair process has to do with accessing the area behind the dent. Given that your dent could be anywhere on your vehicle, it could be in a location where a PDR technician could not access the area behind the dent which will impede the ability to repair the dent.

If it is impossible to access the area behind the dent for whatever reason, the dent cannot be repaired with PDR. The third step is to estimate the dent repair cost for the panel on your vehicle.

Estimators look at the factors above, the quantity of dents, and do a dent repair cost analysis and estimate. In some cases, if there are many dents on a panel or the cost of repairing with PDR exceeds the cost of replacing the panel, we will suggest that the customer take that route. The estimator will also take into account damaged trim pieces and get a quote on what it will cost to replace parts like this.

After this has been completed, a quote is created and reviewed with the customer or the insurance company. If the quote is approved, the repair is scheduled, and the PDR technicians will repair the vehicle. We want to ensure that your car looks as good as the day it rolled off the lot after your dents have been repaired with paintless dent repair.

The cost of repairing your dent depends on the factors listed above in the assessment process. A dent that is more complex will take more time to repair and cost more than a simple dent repair. A dent that is more difficult to repair because the area behind the dent cannot be accessed easily will also take the technician more time to repair and cost more. Another thing to take into account is the quantity of dents on your vehicle. A roof with hail damage and 30 dents will also be more expensive to repair than a single door ding.

Regardless, it is difficult to ballpark exactly what it will cost to repair your dent. No two dents are alike so it is hard to compare! Regardless of the cost, paintless dent repair is always going to be cheaper than the traditional dent repair process, and it is better for the environment too.

Although our trained technicians have a comparable labour rate to an auto body shop, we can often repair dents quicker and save material costs over the traditional dent repair process. Paintless dent repair is the cheapest and most efficient way to repair dents on your vehicle.

We hope you found this comprehensive guide on paintless dent repair helpful and you found answers to many of your PDR related questions. It really is one of the best ways to get a dent out of your car. At Dented, we go the extra mile to ensure having your dents repaired is as quick and painless as possible. That is the Dented advantage and how we deliver quality that cannot be matched by our competitors. If you want your vehicle repaired by true professionals so that it looks as good as the day your car drove off the dealership parking lot, pay a visit to Dented today for a quote.

Can it be Fixed with PDR? Dent Complexity An important part of paintless dent repair and determining if the process can repair your dent is assessing the complexity of the dent itself. There are a few different factors to consider: Creasing in the Dent If the dent is creased, it means that it may not be able to repair with PDR. The Depth of the Dent Another important consideration is the depth of the dent itself in your vehicle.

Common Causes of Small Dents that can be Repaired with PDR The wonderful thing about paintless dent repair is that it can repair a number of different small dents that have been caused by a variety of things. Collisions can be the cause of Small Dents Collisions are often the cause of small dents.

Hail Damage can be Repaired with Paintless Dent Repair During the rainy season, PDR technicians are usually kept pretty busy thanks to the many hail damage repairs that need to be made. Small Dents Caused by Sports Accidents Another common cause of dents in vehicles is sporting accidents. Body Panels that can be Repaired with PDR Many people want to know which body panels can be fixed with paintless dent repair on a vehicle. Hoods can be fixed with Paintless Dent Repair Generally speaking, most alloy and sheet metal hoods can be repaired with the PDR process.

Typically Front Fenders can be Repaired with Paintless Dent Repair Because front fenders are generally easily removed, the area behind dents in them can be accessed and repaired with the PDR process. Quarter Panels Can Normally be Repaired by PDR Quarter panels have some of the same characteristics as front fenders, but they can normally not be removed from your vehicle.

Body Panel Materials that can be Repaired with PDR Generally speaking, most metals and alloy body panels can be repaired with the paintless dent repair process. Materials that cannot be repaired by PDR There are some body panels that are made of different materials with good reason, but they cannot be repaired with the paintless dent repair process. The Paintless Dent Repair Assessment Process Many of our customers wonder how the paintless dent repair damage assessment process works.

The Average Paintless Dent Repair Cost The cost of repairing your dent depends on the factors listed above in the assessment process. For all of your Paintless Dent Repair Needs, Visit Dented We hope you found this comprehensive guide on paintless dent repair helpful and you found answers to many of your PDR related questions.

Contact One of our Locations.